INNOVATE STAND-ALONE GAUGE WIDEBAND KIT
$399.00
Availability : In stock
INNOVATE STAND-ALONE GAUGE WIDEBAND KIT
Innovate Stand-Alone Gauge Wideband Kit
This Innovate Motorsports Stand-alone Gauge Wideband Kit (#227751) contains the LC-1 wideband controller/sensor and XD-16 digital gauge together in one powerful package! We have been using the Innovate Motorsports LM-1 and LMA-3 (Aux-Box)/DL-32 systems for datalogging on our customers cars for over 2 years to help diagnose problems and do any quick ECU tuning touch-ups on the street after dyno tuning. It is a VERY nice system, and offers much more bang for the buck than any other system we've seen.
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 user programmable analog outputs.
The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits. The LC-1's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware
Key Features:
* Only fully digital wideband controller.
* Auto calibration capability to compensate for changes in temperature, altitude, and sensor condition.
* Two user programmable analog outputs.
* Permanent install applications
* Cost effective individual cylinder tuning.
* Easy to upgrade.
* Includes LogWorks software
The XD-16 gauge ships as an Air/Fuel Ratio gauge, but can also be configured to display any channel in the MTS chain or it can be connected to the LM-1. The XD-16 features programmable LED colors and a remote control button to start and stop log sessions, initiate calibrations, or view min/max values. Using other Innovate MTS products, you can even make the gauge flash rapidly if your air:fuel ratio gets richer/leaner than a pre-set number when you are over a given RPM, manifold pressure, etc!
Also, a very unique feature of the XD-16 gauge is that it can be customized via a web-based print tool. You can choose any unit of measurement, various fonts, upload an logo (or other graphic), and then print the high-resolution scaled image directly onto transparency paper. Use you included blank faces, overlay the clear cut out, and you've got a custom gauge face! The XD-16 offers the following features:
* 2 Bezels + 8 faces = 16 combinations (see below)
* 3/4” thick, so it's possible to mount even in surface mount configurations
* Fits 52 mm (2-1/16") gauge pods
* 3-character LED display
* Record/Calibrate/Peak Hold button
* Programmable (values and colors) digital needle
* Billet Aluminum bezel
* The basic kit ships with both black and silver bezels, 8 faces (AFR, Pressure, Temperature, and blank).
* MTS compliant
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 user programmable analog outputs.
The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits. The LC-1's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware
Key Features:
* Only fully digital wideband controller.
* Auto calibration capability to compensate for changes in temperature, altitude, and sensor condition.
* Two user programmable analog outputs.
* Permanent install applications
* Cost effective individual cylinder tuning.
* Easy to upgrade.
* Includes LogWorks software
The XD-16 gauge ships as an Air/Fuel Ratio gauge, but can also be configured to display any channel in the MTS chain or it can be connected to the LM-1. The XD-16 features programmable LED colors and a remote control button to start and stop log sessions, initiate calibrations, or view min/max values. Using other Innovate MTS products, you can even make the gauge flash rapidly if your air:fuel ratio gets richer/leaner than a pre-set number when you are over a given RPM, manifold pressure, etc!
Also, a very unique feature of the XD-16 gauge is that it can be customized via a web-based print tool. You can choose any unit of measurement, various fonts, upload an logo (or other graphic), and then print the high-resolution scaled image directly onto transparency paper. Use you included blank faces, overlay the clear cut out, and you've got a custom gauge face! The XD-16 offers the following features:
* 2 Bezels + 8 faces = 16 combinations (see below)
* 3/4” thick, so it's possible to mount even in surface mount configurations
* Fits 52 mm (2-1/16") gauge pods
* 3-character LED display
* Record/Calibrate/Peak Hold button
* Programmable (values and colors) digital needle
* Billet Aluminum bezel
* The basic kit ships with both black and silver bezels, 8 faces (AFR, Pressure, Temperature, and blank).
* MTS compliant
Write Your Own Review